RAM 1500 Truck 4WD V8-5.2L VIN Y (1997)
Power Seat Motor: Service and Repair
REMOVAL
1. Disconnect and isolate the battery negative cable.
2. Remove the two bolts that secure the front of the seat frame to the floor panel.
3. Remove the two nuts that secure the rear of the seat frame to the studs on the floor panel.
Driver Side Seat Remove/Install
Center Seat Section Remove/Install
4. Remove the two bolts that secure the center seat to the driver side seat frame brackets.
5. Unplug the power seat feed wire harness connector.
6. Remove the driver side seat and adjuster assembly from the vehicle.
Power Seat Adjuster And Motors Remove/Install
