RAM 1500 Truck 4WD V8-5.2L VIN Y (1997)
5. Loosen but do not remove the two fuseblock module mounting screws.
6. From underneath the instrument panel gently push the fuseblock module towards the rear of the vehicle. At the same time reach through the
fuse access panel opening in the left end of the instrument panel and unplug the buzzer module from the receptacle in the fuseblock module.
7. To install the buzzer module align its terminals with the cavities in the fuseblock module receptacle, then push the buzzer module firmlv into
place.
8. Reverse the remaining removal procedures to complete the installation.
9. Test the buzzer module operation.