RAM 1500 Truck 4WD V8-5.2L VIN Y (1997)
![background image](/dodge/ram_1500_4wd/v8-5.2l_vin_y/Page-1577002.png)
Install Pinion Yoke
2. Install yoke on the pinion gear with Installer W-162-D.
CAUTION: Do not exceed the minimum tightening torque when installing the pinion yoke retaining nut. Damage to collapsible spacer or
bearings may result.
3. Install a new nut on the pinion gear. Tighten the nut only enough to remove the shaft end play.
Check Pinion Rotation Torque
4. Rotate the pinion shaft using a (inch lbs.) torque wrench. Rotating torque should be equal to the reading recorded during removal, plus an
additional 0.56 Nm (5 inch lbs.).