RAM 1500 Truck 4WD V8-5.7L VIN D (2005)
1. Disconnect and isolate the negative battery cable.
2. Remove the instrument panel from the vehicle.
3. Remove the blend door lever (1) from the blend door actuator output shaft (2) and the blend door linkage (3).
4. Remove the two screws (1) that secure the blend door actuator and bracket assembly (2) to the top of the HVAC housing (3).
5. Remove the blend door actuator and bracket assembly from the HVAC housing and disconnect the HVAC wire harness connector (4) from the
actuator.
6. Remove the blend door actuator and bracket assembly from the vehicle.
INSTALLATION