RAM 1500 Truck 4WD V8-5.7L VIN D (2005)
22. Install the panel/floor-air doors (1) into the panel/ floor door plate (2).
23. Align the actuator coupler (3) with the panel/floor-air door pivot shaft and install the coupler into side of the panel/floor door plate. Be sure to
install the coupler with the coupler arm located between the two stop tabs on the door plate.
24. Position the panel/floor door assembly (2) onto the top of the HVAC housing (3).
NOTE: Install the two door springs onto the retaining screws prior to installation.
25. Install the three screws (2) that secure the door assembly to the HVAC housing. Tighten the screws to 2.2 N.m (20 in.lbs.).