RAM 1500 Truck 4WD V8-5.7L VIN D (2005)
Underhood Light Bulb: Service and Repair
REMOVAL
1. Disconnect and isolate the battery negative cable.
2. Insert a small flat bladed tool in the access slot between the underhood lamp housing (1) and the lamp lens (2).
3. Gently pry the lens until it unsnaps from the lamp housing.
4. Depress the bulb holder (2) inward far enough to disengage the terminals (3) of the bulb (1) and remove the bulb from the lamp housing (4).
INSTALLATION
CAUTION: Always use the correct bulb size and type for replacement. An incorrect bulb size or type may overheat and cause damage to the lamp, the
socket and/or the lamp wiring.