RAM 1500 Truck 4WD V8-5.7L VIN D (2005)
Audio System Diagnosis Table Part 3 Of 3
Any diagnosis of the Audio system should begin with the use of a scan tool. For information on the use of the scan tool, refer to the appropriate
Diagnostic Service information.
WARNING: DISABLE THE AIRBAG SYSTEM BEFORE ATTEMPTING ANY STEERING WHEEL, STEERING COLUMN, SEAT BELT
TENSIONER, SIDE AIRBAG, OR INSTRUMENT PANEL COMPONENT DIAGNOSIS OR SERVICE. DISCONNECT AND ISOLATE
THE BATTERY NEGATIVE (GROUND) CABLE, THEN WAIT TWO MINUTES FOR THE AIRBAG SYSTEM CAPACITOR TO
DISCHARGE BEFORE PERFORMING FURTHER DIAGNOSIS OR SERVICE. THIS IS THE ONLY SURE WAY TO DISABLE THE
AIRBAG SYSTEM. FAILURE TO TAKE THE PROPER PRECAUTIONS COULD RESULT IN ACCIDENTAL AIRBAG DEPLOYMENT
AND POSSIBLE PERSONAL INJURY.
Chime Inoperative
CHIME INOPERATIVE
POSSIBLE CAUSES
-
Cluster
Diagnostic Test
1. ACTUATE THE CHIME WITH THE DRBIII
Turn the ignition on.
Close the doors.
With the DRBIII(R) select: Electro/Mech Cluster and actuate the Chime.