dodge Workshop Repair Guides

Dodge Workshop Service and Repair Manuals

Diagnostic Trouble Code Descriptions|Page 2519 > < Diagnostic Trouble Code Descriptions|Page 2517
Page 41
background image

-

(C7) Blower motor feed circuit open

-

(A970) Fused B(+) circuit open

-

IPM fuse #4 open

-

Blower motor

-

Ignition switch

-

A/C heater control

Diagnostic Test

1. CHECK THE FUSE

Turn the ignition off.
Remove and inspect IPM Fuse #4.

Q:  Is the fuse open?

YES:  Replace IPM Fuse #4 and Go To 2. 
NO:  Reinstall IPM Fuse #4 and Go To 5.

2. CHECK BLOWER MOTOR OPERATION

Turn the ignition on.
Turn the blower on and operate it in all speeds and modes.

Q:  Does the blower motor operate properly without blowing the fuse?

YES:  Check the (C7) Blower Motor Feed circuit and the (A970) Fused B(+) circuit for an intermittent short to ground. Repair as necessary.
Perform BODY VERIFICATION TEST - VER 1.  See: Testing and Inspection/Diagnostic Trouble Code Tests and Associated
Procedures/Verification Tests/Body Verification Test
NO:  Go To 3

3. CHECK THE (C7) BLOWER MOTOR FEED CIRCUIT FOR A SHORT TO GROUND

Diagnostic Trouble Code Descriptions|Page 2519 > < Diagnostic Trouble Code Descriptions|Page 2517