RAM 1500 Truck 4WD V8-5.7L VIN D (2005)
Disconnect the Instrument Cluster C3 harness connector.
Measure the resistance of the (G76) Right Rear Door Ajar Switch Sense circuit between the Instrument Cluster connector and the Door Latch
connector.
Q: Is the resistance below 5.0 ohms?
YES: Replace the Instrument Cluster. Perform BODY VERIFICATION TEST - VER 1. See: Testing and Inspection/Diagnostic Trouble Code
Tests and Associated Procedures/Verification Tests/Body Verification Test
NO: Repair the (G76) Right Rear Door Ajar Switch Sense circuit for an open. Perform BODY VERIFICATION TEST - VER 1. See: Testing
and Inspection/Diagnostic Trouble Code Tests and Associated Procedures/Verification Tests/Body Verification Test
Right Rear Door Ajar Circuit Shorted to Ground
RIGHT REAR DOOR AJAR CIRCUIT SHORTED TO GROUND
