dodge Workshop Repair Guides

Dodge Workshop Service and Repair Manuals

Diagnostic Trouble Code Descriptions|Page 2061 > < Diagnostic Trouble Code Descriptions|Page 2059
Page 96
background image

Turn the ignition off.
Disconnect the Instrument Cluster C3 harness connector.
Measure the resistance of the (G77) Left Rear Door Ajar Switch Sense circuit between the Instrument Cluster connector and the Door Latch
connector.

Q:  Is the resistance below 5.0 ohms?

YES:  Replace the Instrument Cluster. Perform BODY VERIFICATION TEST - VER 1.  See: Computers and Control Systems/Testing and
Inspection/Diagnostic Trouble Code Tests and Associated Procedures/Verification Tests/Body Verification Test
NO:  Repair the (G77) Left Rear Door Ajar Switch Sense circuit for an open. Perform BODY VERIFICATION TEST - VER 1.  See: Computers
and Control Systems/Testing and Inspection/Diagnostic Trouble Code Tests and Associated Procedures/Verification Tests/Body Verification Test

Left Rear Door Ajar Circuit Shorted to Ground

LEFT REAR DOOR AJAR CIRCUIT SHORTED TO GROUND

Diagnostic Trouble Code Descriptions|Page 2061 > < Diagnostic Trouble Code Descriptions|Page 2059