RAM 1500 Truck 4WD V8-5.7L VIN D (2005)
8. Remove the screw (6) that secures the rear center seat belt retractor (3) to the center anchor (5) and right outboard occupant (1) buckles and
mounting bracket (4) unit on the rear floor panel near the cab back panel.
9. Remove the rear center seat belt retractor from the center anchor and right outboard occupant buckles and mounting bracket unit.
10. Remove the rear center seat belt and retractor unit from the vehicle.
INSTALLATION
1. Position the rear center seat belt and retractor unit (3) onto the center anchor (5) and right outboard occupant (1) buckles and mounting bracket (4)
unit on the rear floor panel near the base of the cab back panel.
2. Install and tighten the screw (6) that secures the rear center seat belt retractor bracket to the center anchor and right outboard occupant buckles and
mounting bracket unit. Tighten the screw to 40 N.m (29 ft.lbs.).
3. Position the belt bracket (5) of the rear center seat belt (2) onto the body bracket (7) on the upper cab back panel (1) reinforcement.
4. Install and tighten the two screws (6) that secure the belt bracket of the rear center seat belt to the body bracket. Tighten the screws to 20 N.m (15
ft.lbs.).