RAM 1500 Truck 4WD V8-5.7L VIN D (2005)
![background image](/dodge/ram_1500_4wd/v8-5.7l_vin_d/Page-1354013.png)
6. Hold pinion flange (1) with Flange Wrench 8979 (2) and remove pinion flange nut.
7. Remove pinion flange (1) with Pinion Flange Puller 8992 (2)
8. Remove pinion shaft seal with a pry tool or slide hammer mounted screw.
INSTALLATION
1. Install new pinion seal with Handle C-4171 (1) and Installer 8896 (2).
2. Apply a light coat of teflon sealant to the pinion flange splines.
3. Lightly tap the pinion flange onto the pinion until a few threads are showing.
4. Install flange washer and new pinion nut.