RAM 1500 Truck 4WD V8-5.7L VIN D (2005)
2. Remove axle shaft seal (1) from the end of the axle tube (2) with a pry bar.
INSTALLATION
1. Remove any old sealer/burrs from axle tube.
2. Coat new seal lip with axle lubricant and install seal with Installer 9343 (1) and Handle C-4171(2).
3. Install axle shaft.
Seal - Pinion
SEAL-PINION
REMOVAL
1. Remove propeller shaft.
2. Remove brake calipers to prevent any drag.
3. Rotate pinion yoke three or four times.