RAM 1500 Truck 4WD V8-5.9L VIN Z (2002)
4. Disconnect all wire harness support push pins.
5. Remove the rear two cargo box bolts (3) and loosen the remaining bolts.
6. Using a suitable lifting device, lift and support the rear of the cargo box and remove the hitch.
INSTALLATION
1. On Light Duty Vehicles, install the hitch (5) onto the frame rails and make sure the locators (1 and 2) on the inside of the hitch brackets are
engaged with the holes in the top of the frame rails properly.
2. Install the hitch bolts (7) and tighten to 170 N.m (125 ft.lbs.).
3. Connect all wire harness support push pins.
