RAM 1500 Truck 4WD V8-5.9L VIN Z (2002)
Front Door Panel: Service and Repair
Front Door Trim Panel
REMOVAL
Fig. 20 Window Crank Removal Tool
1. Remove the window crank, if equipped.
2. Remove the interior handle.
Fig. 12 Trim Panel Assembly
3. Remove the screws at the mirror flag and near the inside handle.
CAUTION: Trim panel is attached to the door using hooks molded into the panel. Do not pull the trim panel straight off or damage to the panel and/or
power switch assembly may occur.
4. Lift the trim panel up off the belt seal and attachment hooks and separate the panel from the door slightly.
5. Disconnect the power window switch electrical connector, if equipped, and remove the trim panel.
INSTALLATION
1. Install the window switch into the trim panel, if equipped.
2. Position the trim panel onto the lower hooks and connect the power window switch electrical connector, if equipped.
3. Position the remaining trim panel attachment hooks into the door panel and seat the trim panel into the belt seal fully.
4. Install the screws near the inside handle and at the mirror flag.
5. Install the interior handle.
