RAM 1500 Truck 4WD V8-5.9L VIN Z (2002)
3. Separate the rear door opening seal (5) from the door opening flange.
INSTALLATION
FRONT DOOR SEAL
1. Position the front door seal (6) to the bottom of the door opening, with bulb facing outboard, starting the installation at the center of the lower
flange. Press the seal onto the sill flange and work around the perimeter of the door opening until fully seated. Work in one direction, smoothing
the seal to avoid puckers or wrinkles.
2. If vehicle is a Standard Cab, install the lower b-pillar trim (3).
