RAM 1500 Truck 4WD V8-5.9L VIN Z (2002)
Rear Fender Liner: Service and Repair
REAR WHEELHOUSE SPLASH SHIELD
REMOVAL
1. Raise and support the vehicle.
2. Remove the three screws (2) that secure the rear splash shield (3) to the cargo box (1) and remove the splash shield.
INSTALLATION
1. Position the rear splash shield (3) onto the cargo box (1).
2. Install the three screws (2) that secure the rear splash shield to the cargo box. Tighten the screws to 5 N.m (44 in.lbs.).
3. Lower the vehicle.
