RAM 1500 Truck 4WD V8-5.9L VIN Z (2002)
Arm Rest: Service and Repair
CENTER ARMREST/SEAT BACK
REMOVAL
1. Before proceeding with the following repair procedure, review all warnings and cautions. Refer to Seats / Service Precautions.
NOTE: Do not reuse the seat fasteners, always replace with new ones.
2. Remove the center seat.
3. Disconnect the storage bin/cushion cover j-straps and position aside.
4. Remove and discard the hinge bolts (2) and separate the seat back from the storage bin/cushion (1).
INSTALLATION
1. Before proceeding with the following repair procedure, review all warnings and cautions. Refer to Seats / Service Precautions.
NOTE: Do not reuse the seat fasteners, always replace with new ones.
2. Install the seat back onto the storage bin/cushion (1) and install new hinge bolts (2).
3. Tighten the hinge to storage bin/cushion bolts (2) to 25 N.m (18 ft.lbs.).
4. Connect the storage bin/cushion cover j-straps.
5. Install the center seat.
