RAM 1500 Truck 4WD V8-5.9L VIN Z (2002)
Illustration C
3. If working on a rocker panel, lower quarter panel, or other location with limited access for clamping, use screws to hold the panels together during te
curing process Remove all adhesive squeeze out before it cures.
4. Allow the adhesive to cure approximately two to two and a half hours to reach handling strength. The Mopar / Fusor #112B fully cures in
approximately eight hours. Expect the adhesive to be a little "tacky" on the surface once cured. This is a normal property of this adhesive.
5. Remove the clamps and/or screws. If screws must be used in a cosmetic area, all excess adhesive must be removed.
6. Bevel the screw-holes and prepare the joint and screw holes for the application of waterproof fiber-filled body filler. Complete the repair using
conventional body filler.
7. Refinish following paint manufacturer's recommendation.
Corrosion
Corrosion
Overview:
There are certain rule of thumb conditions when repairing any type of corrosion:
All rust / corrosion must be removed or it will return.
