RAM 1500 Truck 4WD V8-5.9L VIN Z (2002)
PARTS REQUIRED:
NOTE:
**The passenger side door lock cylinder switch has been eliminated on 2002 and 2003 Durangos and on 2003 Dakotas built after April 7, 2003
(MDH 0407XX)**.
REPAIR PROCEDURE:
1.
Remove the driver, passenger (if equipped), and liftgate (Durango only) door lock cylinder switches. Refer to the appropriate Service Manual
Group 8Q, pages 8QA and 8Q-5 or the service information available in the MDS2 for DOOR LOCK CYLINDER SWITCH and/or LIFTGATE
LOCK CYLINDER SWITCH - REMOVAL AND INSTALLATION procedures.
2.
The door lock cylinder switch actuator must be positioned in its neutral position prior to installing the new switch on the lock cylinder. Rotate the
actuator until the actuator is positioned as shown in the following figure (Fig. 1).
