RAM 1500 Truck 4WD V8-5.9L VIN Z (2002)
REAR-STANDARD CAB
1. Raise the window glass to the full up position and remove the window regulator.
2. Remove the two bolts (1) that secure the rear glass run channel (2) to the door.
3. Remove the rear glass run channel from the door through the door panel opening (3).
4. If required, remove the weatherstrip from the rear glass run channel.
INSTALLATION
FRONT-ALL MODELS
1. If removed, install the weatherstrip onto the front glass run channel (1).
2. Position the front glass run channel into the door (5) through the door panel opening (4).
3. Engage the two bolts (2 and 3) that secure the front glass run channel to the door. Tighten the bolts to 10 N.m (89 in.lbs.).
4. Install the window regulator and verify correct window operation.
REAR-QUAD CAB
