RAM 1500 Truck 4WD V8-5.9L VIN Z (2002)
10. Remove the pedal assembly mounting nuts/ fasteners).
INSTALLATION
1. Install the pedal assembly to the vehicle.
2. Install the mounting bolts and tighten to 28 Nm (21 ft. lbs.).
3. Reconnect the accelerator cable to the pedal.
4. Install the module mounting bolts and tighten to 38 Nm (28 ft. lbs.).
5. Reconnect the electrical connectors.
6. Install the brake booster.
7. Install the steering column.
8. Install a new brake lamp switch.
9. On vehicles equipped with adjustable brake pedal.Reconnect the electrical connector to the motor and the adjuster cable at the pedal.
10. Install the steering column opening cover.
11. Reconnect the negative battery cable.
