RAM 1500 Truck 4WD V8-5.9L VIN Z (2002)
2.
Using Mopar Brake Clean.
(P/N 04897150AB) or equivalent and a shop towel, remove all dirt, mud and/or rustproofing from the axle tube between the axle flange and the
axle U-bolts (Figure 1).
CAUTION:
The axle tube area where the reinforcement bracket mounts must be clean before installation. Failure to clean the axle tube may cause
reinforcement bracket misalignment.
3.
Remove and discard the two original brake caliper adapter-to-caliper mounting bracket bolts on the left caliper (Figure 2).
