RAM 1500 Truck 4WD V8-5.9L VIN Z (2002)
Top Anti-Rattle Spring
9. Remove the anti-rattle springs from the caliper adapter and.
NOTE: Anti-rattle springs are not interchangeable.
INSTALLATION
1. Bottom pistons in caliper bore with C-clamp. Place an old brake shoe between a C-clamp and caliper piston.
2. Clean caliper mounting adapter and anti-rattle springs.
3. Lubricate anti-rattle springs with Mopar brake grease.
4. Install anti-rattle springs.
NOTE: Anti-rattle springs are not interchangeable.
5. Install inboard brake shoe in adapter.
6. Install outboard brake shoe in adapter.
7. Tilt the top of the caliper over rotor and under adapter. Then push the bottom of the caliper down onto the adapter.
8. Install caliper.
9. Install wheel and tire assemblies and lower vehicle.
10. Apply brakes several times to seat caliper pistons and brake shoes and obtain firm pedal.
11. Top off master cylinder fluid level.
