RAM 1500 Truck 4WD V8-5.9L VIN Z (2002)
1. Apply thread sealant to the sensor threads.
2. Install the sensor to the engine.
3. Tighten the sensor to 11 Nm (8 ft. lbs.) torque.
4. Connect the electrical connector to the sensor.
5. Replace any lost engine coolant.
4.7L
1. Apply thread sealant to the sensor threads.
2. Install the sensor to the engine.
3. Tighten the sensor to 11 Nm (8 ft. lbs.) torque.
4. Connect the electrical connector to the sensor.
5. Replace any lost engine coolant.
5.9L
1. Apply thread sealant to the sensor threads.
2. Install the sensor to the engine.
3. Tighten the sensor to 6 - 8 Nm (55 - 75 inch lbs.) torque.
4. Connect the electrical connector to the sensor. The sensor connector is symmetrical (not indexed). It can be connected to the sensor in either
direction.
5. Refill the cooling system.