dodge Workshop Repair Guides

Dodge Workshop Service and Repair Manuals

Drive Belt|Diagrams|Page 1549 > < Drive Belt|Diagrams|Page 1547
Page 2
background image

Part 2 of 2

ACCESSORY DRIVE BELT DIAGNOSIS CHART 

VISUAL DIAGNOSIS 

When diagnosing serpentine accessory drive belts, small cracks that run across the ribbed surface of the belt from rib to rib (Fig. 8), are considered
normal. These are not a reason to replace the belt. However, cracks running along a rib (not across) are not normal. Any belt with cracks running along
a rib must be replaced (Fig. 8). Also replace the belt if it has excessive wear, frayed cords or severe glazing. 

NOISE DIAGNOSIS 

Noises generated by the accessory drive belt are most noticeable at idle. Before replacing a belt to resolve a noise condition, inspect all of the
accessory drive pulleys for alignment, glazing, or excessive end play.

Drive Belt|Diagrams|Page 1549 > < Drive Belt|Diagrams|Page 1547