RAM 1500 Truck 4WD V8-5.9L VIN Z (2002)
Spark Plug: Description and Operation
Resistor type spark plugs are used.
Spark plug resistance values range from 6,000 to 20,000 ohms (when checked with at least a 1000 volt spark plug tester). Do not use an ohmmeter to
check the resistance values of the spark plugs. Inaccurate readings will result.
To prevent possible pre-ignition and/or mechanical engine damage, the correct type/heat range/number spark plug must be used.
Always use the recommended torque when tightening spark plugs. Incorrect torque can distort the spark plug and change plug gap. It can also pull the
plug threads and do possible damage to both the spark plug and the cylinder head.
Remove the spark plugs and examine them for burned electrodes and fouled, cracked or broken porcelain insulators. Keep plugs arranged in the order in
which they were removed from the engine. A single plug displaying an abnormal condition indicates that a problem exists in the corresponding cylinder.
Replace spark plugs at the intervals recommended in Lubrication and Maintenance
Spark plugs that have low mileage may be cleaned and reused if not otherwise defective, carbon or oil fouled. Also refer to Spark Plug Conditions.
CAUTION: Never use a motorized wire wheel brush to clean the spark plugs. Metallic deposits will remain on the spark plug insulator and will cause
plug misfire.
