RAM 1500 Truck 4WD V8-5.9L VIN Z (2002)
DEPLOYMENT AND POSSIBLE PERSONAL INJURY.
1. Position the recirculation door actuator onto the intake air housing. If necessary, rotate the actuator slightly to align the splines on the actuator
output shaft with those in the recirculation air door.
2. Install and tighten the two screws that secure the recirculation door actuator to the lower intake air housing. Tighten the screws to 2 Nm (17 in.
lbs.).
3. Reconnect the HVAC wire harness connector for the recirculation door actuator to the actuator connector receptacle.
4. Install the Instrument Panel
5. Reconnect the battery negative cable.
6. Perform the heater-A/C control calibration procedure.