RAM 1500 Truck 4WD V8-5.9L VIN Z (2002)
Fig. 13 HVAC Control - (Rear View - Typical)
5. Unplug the wire harness connectors from the back of the A/C Heater control.
INSTALLATION
1. Plug the two wire harness connectors into the back of the A/C Heater control.
2. Position the A/C Heater control in the instrument panel bezel and secure it with four screws. Tighten the screws to 2.2 Nm (20 in. lbs.).
3. Reinstall the center bezel onto the instrument panel.
4. Connect the battery negative cable.