RAM 1500 Truck 4WD V8-5.9L VIN Z (2002)
Tail Lamp: Service and Repair
Tail Lamp Replacement
REMOVAL
1. Disconnect and isolate the negative battery cable.
2. Remove the tail lamp unit (Refer to LAMPS/LIGHTING - EXTERIOR/TAIL LAMP UNIT - REMOVAL).
3. Remove the bulb back plate from the tail lamp unit.
Pull Bulb From Socket
4. Release the bulb locking tabs and remove the bulb from the back plate.
INSTALLATION
1. Install the bulb into the back plate.
2. Install the bulb back plate to the tail lamp unit.
3. Install the tail lamp unit (Refer to LAMPS/LIGHTING - EXTERIOR/TAIL LAMP UNIT - INSTALLATION).
4. Connect the negative battery cable.
