RAM 1500 Truck 4WD V8-5.9L VIN Z (2002)
Alignment: Service and Repair
Wheel Alignment
Camber and Caster Adjustment
STANDARD PROCEDURE-CAMBER AND CASTER ADJUSTMENT
NOTE: 4X4 SUSPENSION HEIGHT MEASUREMENT MUST BE PERFORMED BEFORE AN ALIGNMENT.
NOTE: When the upper control arm pivot bolts are loosened the upper control arm will normally go inwards toward the frame automatically with the
weight of the vehicle.
Camber and caster angle adjustments involve changing the position of the upper control arm in conjunction with the slotted holes in the frame brackets
using special tool 8876 to move the upper control arm outwards for proper adjustment.
Camber, Caster and Toe Adjustment
STANDARD PROCEDURE-CAMBER, CASTER AND TOE ADJUSTMENT
NOTE: 4X4 SUSPENSION HEIGHT MEASUREMENT MUST BE PERFORMED BEFORE AN ALIGNMENT.
Camber and caster angle adjustments involve changing the position of the upper control arm with the slots in the frame brackets using special tool
8876 to move the upper control arm outwards for proper adjustment.