RAM 1500 Truck 4WD V8-5.9L VIN Z (2002)
Fuel Pump Pickup Filter: Service and Repair
INLET FILTER
REMOVAL
Fig. 28 Fuel Pump Inlet Filter
The fuel pump inlet filter (strainer) is located on the bottom of the fuel pump module (Fig. 28). The fuel pump module is located inside of fuel tank.
1. Remove fuel tank. Refer to Fuel Tank Removal/Installation.
2. Remove fuel pump module. Refer to Fuel Pump Module Removal/Installation.
3. Remove filter by carefully prying 2 lock tabs at bottom of module with 2 screwdrivers. Filter is snapped to module.
4. Clean bottom of pump module.
INSTALLATION
The fuel pump inlet filter (strainer) is located on the bottom of the fuel pump module (Fig. 28). The fuel pump module is located inside of fuel tank.
1. Snap new filter to bottom of module. Be sure O-ring is in correct position.
2. Install fuel pump module. Refer to Fuel Pump Module Removal/Installation.
3. Install fuel tank. Refer to Fuel Tank Removal/ Installation.
