RAM 1500 Truck 4WD V8-5.9L VIN Z (2002)
Canister Purge Solenoid: Service and Repair
Fig. 2 EVAP/Duty Cycle Purge Solenoid
REMOVAL
The duty cycle EVAP canister purge solenoid is located in the engine compartment. It is attached to the side of the Power Distribution Center (PDC).
1. Disconnect electrical wiring connector at solenoid.
2. Disconnect vacuum harness at solenoid.
3. Remove solenoid from mounting bracket.
INSTALLATION
1. Install solenoid assembly to mounting bracket.
2. Connect vacuum harness
3. Connect electrical connector.
