RAM 1500 Truck 4WD V8-5.9L VIN Z (2002)
Fig. 23 EVAP Canisters - Removal/Installation
3. Remove lower support bracket.
4. Remove mounting nuts at top of each canister.
5. Remove each canister from upper support bracket.
INSTALLATION
1. Place each canister into upper support bracket and install nuts. Refer to Torque Specifications.
2. Install lower support bracket. Refer to Torque Specifications.
3. Carefully install vapor/vacuum lines. The vapor/vacuum lines and hoses must be firmly connected. Also check the vapor/vacuum lines at the LDP,
LDP filter and EVAP canister purge solenoid for damage or leaks. If a leak is present, a Diagnostic Trouble Code (DTC) may be set.
