RAM 1500 Truck 4WD V8-5.9L VIN Z (2002)
plastic retainer ring into fitting (Fig. 12). With plastic ring depressed, pull fitting from component. The plastic retainer ring must be pressed
squarely into fitting body. If this retainer is cocked during removal, it may be difficult to disconnect fitting. Use an open-end wrench on
shoulder of plastic retainer ring to aid in disconnection.
b. After disconnection, plastic retainer ring will remain with quick-connect fitting connector body.
c. Inspect fitting connector body, plastic retainer ring and fuel system component for damage. Replace as necessary
Fig. 13 Latch Clip-Type 1
Fig. 14 Latch Clip-Type 2
9. Latch Clips: Depending on vehicle model and engine, 2 different types of safety latch clips are used (Fig. 13) or (Fig. 14). Type-1 is tethered to
fuel line and type-2 is not. A special tool will be necessary to disconnect fuel line after latch clip is removed. The latch clip may be used on certain
fuel line/fuel rail connection, or to join fuel lines together.
a. Type 1: Pry up on latch clip with a screwdriver (Fig. 13).
b. Type 2: Separate and unlatch 2 small arms on end of clip (Fig. 14) and swing away from fuel line.
c. Slide latch clip toward fuel rail while lifting with screwdriver.
