RAM 1500 Truck 4WD V8-5.9L VIN Z (2002)
Fuel Gauge Sender: Service and Repair
REMOVAL
Fig. 4 Location - Fuel Gauge Sending Unit
The fuel level sending unit (fuel level sensor) and float assembly is located on the side of the fuel pump module (Fig. 4).
1. Remove fuel pump module from fuel tank. Refer to Fuel Pump Module Removal/Installation.
Fig. 5 Fuel Gauge Sending Unit - R/I
2. To remove sending unit from pump module, lift on plastic locking tab (Fig. 5) while sliding sending unit tracks.
3. Disconnect 4-wire electrical connector (Fig. 4) from fuel pump module. Separate necessary sending unit wiring from connector using terminal pick
/ removal tool.