RAM 1500 Truck 4WD V8-5.9L VIN Z (2002)
Ignition Coil: Description and Operation
Fig. 20 Ignition Coil Location - 5.9L
IGNITION COIL
A single ignition coil is used. The coil is not oil filled. The coil windings are embedded in an epoxy compound. This provides heat and vibration
resistance that allows the coil to be mounted on the engine.
The Powertrain Control Module (PCM) opens and closes the ignition coil ground circuit for ignition coil operation.
Battery voltage is supplied to the ignition coil positive terminal from the ASD relay. If the PCM does not see a signal from the crankshaft and
camshaft sensors (indicating the ignition key is ON but the engine is not running), it will shut down the ASD circuit.
Base ignition timing is not adjustable on any engine. By controlling the coil ground circuit, the PCM is able to set the base timing and adjust the
ignition timing advance. This is done to meet changing engine operating conditions.
