RAM 1500 Truck 4WD V8-5.9L VIN Z (2002)
Brake Light Switch: Service and Repair
Fig. 3 Brake Lamp Switch & Bracket
REMOVAL
1. Disconnect the switch harness.
2. Press and hold the brake pedal in applied position.
3. Rotate the switch counterclockwise about 300 to align the switch lock tab with the notch in bracket.
4. Pull the switch rearward out of the mounting bracket and release the brake pedal.
INSTALLATION
1. Press and hold the brake pedal down.
2. Align the tab on the new switch with the notch in the switch bracket. Insert the switch in the bracket and turn it clockwise about 30 ° to lock it in
place.
3. Connect the harness wires to the switch.
4. Release the brake pedal.
5. Move the release lever on the switch parallel with the connector to engage the switch plunger. The switch is now adjusted and can not be adjusted
again.