RAM 1500 Truck 4WD V8-5.9L VIN Z (2002)
Battery Tray: Service and Repair
Battery Holddown
REMOVAL
1. Loosen and remove the battery hold down retaining bolt.
2. Remove the battery hold down bracket from the battery case.
INSTALLATION
1. Clean and inspect the battery hold down hardware (Refer to BATTERY SYSTEM - CLEANING).
2. Position the battery hold down bracket in the battery tray. Be certain that the hold down bracket is properly positioned in the battery tray before
tightening the hold down hardware.
3. Install and tighten the battery hold down retaining bolt.
