RAM 1500 Truck 4WD V8-5.9L VIN Z (2002)
Starter Solenoid: Testing and Inspection
DIAGNOSIS AND TESTING - STARTER SOLENOID
This test can only be performed with starter motor removed from vehicle.
1. Remove starter motor from vehicle.
2. Disconnect wire from solenoid field coil terminal.
Fig. 7 Continuity Between Solenoid and Field Coil Terminals - Typical
3. Check for continuity between solenoid terminal and solenoid field coil terminal with a continuity tester (Fig. 7). There should be continuity. If OK,
go to Step 4. If not OK, replace faulty starter motor assembly.
Fig. 8 Continuity Between Solenoid Terminal and Case - Typical
4. Check for continuity between solenoid terminal and solenoid case (Fig. 8). There should be continuity. If not OK, replace faulty starter motor
assembly.