RAM 1500 Truck 4WD V8-5.9L VIN Z (2002)
4. Tighten the tie rod jam nut to 75 Nm (55 ft. lbs.).
5. Verify the specifications
6. Turn off engine.
Toe Adjustment
STANDARD PROCEDURE-TOE ADJUSTMENT
4X4 SUSPENSION HEIGHT MEASUREMENT MUST BE PERFORMED BEFORE AN ALIGNMENT.
The wheel toe position adjustment is the final adjustment.
1. Start the engine and turn wheels both ways before straightening the wheels. Secure the steering wheel with the front wheels in the straight-ahead
position.
2. Loosen the tie rod jam nuts.
NOTE: Each front wheel should be adjusted for one-half of the total toe position specification. This will ensure the steering wheel will be
centered when the wheels are positioned straight-ahead.
3. Adjust the wheel toe position by turning the inner tie rod as necessary.
4. Tighten the tie rod jam nut to 75 Nm (55 ft. lbs.).
