RAM 1500 Truck 4WD V8-5.9L VIN Z (2002)
Steering Gear: Service and Repair
GEAR
REMOVAL
1. Lock the steering wheel.
2. Drain and siphon the power steering fluid from the reservoir.
3. Raise the vehicle.
4. Remove and discard the steering coupler pinch bolt.
5. Remove the power steering hoses from the rack & pinion.
6. Remove the tire and wheel assembly.
7. Remove the tie rod end nuts and separate tie rod ends from the knuckles with Special tool 8677.
8. Remove the skid plate.
9. Remove the rack & pinion mounting bolts. &
10. Remove the rack & pinion from the vehicle.
INSTALLATION
NOTE: Before installing gear inspect bushings and replace if worn or damaged.