RAM 1500 Truck 4WD V8-5.9L VIN Z (2002)
Both the accumulator and the 3-4 accumulator function the same. Line pressure is directed to the small end of the piston when the transmission is placed
into a DRIVE position (Fig. 75), bottoming it against the accumulator plate. When the 1-2 upshift occurs (Fig. 76), line pressure is directed to the large
end of the piston and then to the kickdown servo. As the line pressure reaches the accumulator, the combination of spring pressure and line pressure
forces the piston away from the accumulator plate. This causes a balanced pressure situation, which results in a cushioned band application. After the
kickdown servo has become immovable, line pressure will finish pushing the accumulator up into its bore. When the large end of the accumulator piston
is seated in its bore, the band or clutch is fully applied.
NOTE: The accumulator is shown in the inverted position for illustrative purposes.
