RAM 1500 Truck 4WD V8-5.9L VIN Z (2002)
Extension Housing: Service and Repair
46RE - Automatic Transmission
EXTENSION HOUSING BUSHING
REMOVAL
1. Remove extension housing yoke seal.
2. Insert Remover 6957 into the extension housing. Tighten tool to bushing and remove bushing (Fig. 94).
INSTALLATION
1. Align bushing oil hole with oil slot in extension housing.
2. Tap bushing into place with Installer 6951 and Handle C-4171.
3. Install new oil seal in housing using Seal Installer C-3995-A (Fig. 95).
