RAM 1500 Truck 4WD V8-5.9L VIN Z (2002)
2. Remove bushing with Tool Handle C-4171 and Bushing Remover SP-3550 (Fig. 125).
REACTION SHAFT SUPPORT BUSHING REMOVAL
1. Assemble Cup Tool SP-3633, Nut SP-ll91 and Bushing Remover SP-5301 (Fig. 126).
2. Hold cup tool firmly against reaction shaft. Thread remover tool into bushing as far as possible by hand.
3. Using wrench, thread remover tool an additional 3 - 4 turns into bushing to firmly engage tool.
4. Tighten tool hex nut against cup tool to pull bushing from shaft. Clean all chips from shaft and support after bushing removal.