RAM 1500 Truck 4WD V8-5.9L VIN Z (2002)
Fluid Pump: Service and Repair
Assembly
46RE - AUTOMATIC TRANSMISSION
ASSEMBLY
OIL PUMP BUSHING
1. Assemble Tool Handle C-4171 and Bushing Installer SP-5118 (Fig. 128).
2. Place bushing on installer tool and start bushing into shaft.
3. Tap bushing into place until Installer Tool SP-5118 bottoms in pump cavity. Keep tool and bushing square with bore. Do not allow bushing to
become cocked during installation.
4. Stake pump bushing in two places with blunt punch. Remove burrs from stake points with knife blade (Fig. 129).
REACTION SHAFT SUPPORT BUSHING
1. Place reaction shaft support upright on a clean, smooth surface.
