RAM 1500 Truck 4WD V8-5.9L VIN Z (2002)
Overdrive Assembly: Service and Repair
Assembly
46RE - Automatic Transmission
ASSEMBLY
GEARTRAIN AND DIRECT CLUTCH
1. Soak direct clutch and overdrive clutch discs in Mopar ATE +4, type 9602, transmission fluid. Allow discs to soak for 10-20 minutes.
2. Install new pilot bushing and clutch hub bushing in output shaft if necessary (Fig. 168). Lubricate bushings with petroleum jelly, or transmission
fluid.
3. Install annulus gear on output shaft, if removed. Then install annulus gear retaining snapring (Fig. 169).
