RAM 1500 Truck 4WD V8-5.9L VIN Z (2002)
45RFE - AUTOMATIC TRANSMISSION
ASSEMBLY
1. Clean and inspect all components. Replace any components, which show evidence of excessive wear or scoring.
2. Install the number 11 bearing into the input planetary carrier so that the inner race will be toward the front of the transmission (Fig. 116).
3. Install the input sun gear into the input carrier (Fig. 116).
4. Install the number 10 bearing onto the rear of the reverse planetary carrier with the inner race toward the carrier (Fig. 116).
5. Install the number 9 bearing onto the front of the reverse planetary carrier with the outer race toward the carrier and the inner race facing upward
(Fig. 116).
6. Install the reverse planetary gear carrier into the input carrier (Fig. 116).
7. Install the input annulus gear into the input carrier (Fig. 116).
8. Install the snap-ring to hold the input annulus gear into the input carrier (Fig. 116).
