RAM 1500 Truck 4WD V8-5.9L VIN Z (2002)
Seals and Gaskets: Service and Repair
45RFE 4 Speed
Oil Pump Front Seal
45RFE - Automatic Transmission
Oil Pump Front Seal / REMOVAL
1. Remove transmission from the vehicle.
2. Remove the torque converter from the transmission.
3. Using a screw mounted in a slide hammer, remove the oil pump front seal.
INSTALLATION
1. Clean seal bore of the oil pump of any residue or particles from the original seal.
2. Install new oil seal in the oil pump housing using Seal Installer C-3860-A (Fig. 104).
Adapter Housing Seal
45RFE - Automatic Transmission
ADAPTER HOUSING SEAL / REMOVAL
1
Remove the transfer case from the Transmission.
2
Using a screw mounted on a slide hammer, remove the adapter housing seal.
Installation
1
Clean the adapter seal bore in the adapter housing of any residue or particles remaining from the original seal.