RAM 1500 Truck 4WD V8-5.9L VIN Z (2002)
15. Remove manual lever and throttle lever (Fig. 304). Rotate and lift manual lever off valve body and throttle lever shaft. Then slide throttle lever out
of valve body.
16. Position pencil magnet next to detent housing to catch detent ball and spring. Then carefully remove Retainer Tool 6583 and remove detent ball
and spring (Fig. 305).
17. Remove screws attaching pressure adjusting screw bracket to valve body and transfer plate (Fig. 306). Hold bracket firmly against spring tension
while removing last screw.
